![background image](/i/samsung/106938/samsung-scx-3205w/h/samsung-scx-3205w-039.png)
Wireless network setup (SCX-3205W(K))
_ 39
TCP/IP
to change the assignment method to DHCP.
•
For the Static method
If the IP address assignment method is Static, check if Static is
shown in the window. However, if it shows DHCP, click
Change
TCP/IP
to enter the IP address and other network configuration
values for the machine. Before entering the IP address for the
machine, you must know the computer’s network configuration
information. If the computer is set to DHCP, you must contact the
network administrator to get the static IP address.
Example)
If computer’s network information is as below:
-
IP address: 169.254.133.42
-
Subnet Mask: 255.255.0.0
Machine’s network information should be as below:
-
IP address: 169.254.133. 43 (Use computer’s IP address,
with changed last three digits.)
-
Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
-
Gateway: 169.254.133.1 (Change the last three digits from IP
address of your machine to 1.)
9.
When the wireless network setting is completed, disconnect the USB
cable between the computer and machine. Click
Next
.
10. Wireless Network Setting Complete
window appears. Then, click
Next
.
Select
Yes
if you accept the current settings and continue the setup
procedure.
Select
No
if you want to return to the beginning screen.
Then, click
Next
.
11.
Click
Next
when the
Confirm Printer Connection
window appears.
12.
Select the components to be installed. Click
Next
.
After selecting the components, you can also change the machine
name, set the machine to be shared on the network, set the machine
as the default machine, and change the port name of each machine.
Click
Next
.
13.
After the installation is finished, a window asking you to print a test
page appears. If you want to print a test page, click
Print a test
page
.
Otherwise, just click
Next
and skip to step 15.
14.
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
15.
To register as a user of the machine in order to receive information
from Samsung, click
On-line Registration
.
16.
Click
Finish
.
Installing the machine on an Ad-Hoc wireless
network (Windows)
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an Ad-Hoc wireless network by
following the simple steps below.
Items to prepare
Ensure you have next items ready.
•
Wireless network computer
•
Software CD provided with your machine
•
Wireless network machine
•
USB cable
Creating the Ad-Hoc network in Windows
When the items are ready, follow below steps:
1.
Check whether the USB cable is connected to the machine.
2.
Turn on your computer and the wireless network machine.
3.
Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation
window appear.
•
If the installation window does not appear, click
Start
and then
Run
. Type X:\
Setup.exe
, replacing “X” with the letter which
represents your drive. Click
OK
.
•
If you use Windows Vista, Windows 7 or Windows Server 2008
R2 click
Start
>
All programs
>
Accessories
>
Run
.
Type X:\
Setup.exe
replacing “X” with the letter which represents
your drive and click
OK
.
•
If the
AutoPlay
window appears in Windows Vista, Windows 7 or
Windows Server 2008 R2, click
Run
Setup.exe
in
Install or run
program
field, and click
Continue
or
Yes
in the
User Account
Control
windows.
4.
Select the
Wireless Setting and Installation
option.
•
Install Now:
First you must configure the wireless network
settings of your printer to print through wireless.
•
Wireless Setting and Installation:
Configure the wireless
network settings of your printer with a USB cable then install the
printer driver. Press this button to set up the wireless connection
if you have not set up the wireless connection before.
5.
Read the
License Agreement
, and select
I accept the terms of the
License Agreement
. Then, click
Next
.
6.
The software searches the wireless network.
If the software has failed to search the network, check if the
USB cable is connected properly between the computer and
machine, and follow the instruction on the window.
7.
After searching the wireless network,
a list of wireless network your
machine has searched appears.
If you want to use the Samsung default ad-hoc setting, select the last
wireless network on the list, which
Network Name(SSID)
is
airportthru
and
Signal
is
Printer Self Network
.
Then, click
Next
.
If you want to use other ad-hoc settings, select other wireless
network from the list.
If you want to change ad-hoc settings click the
Advanced
Setting
button
.
•
Enter the wireless Network Name:
Type in the SSID