46
|
Faxing
Receiving in secure receiving mode
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the printer is unattended. In secure
receiving mode, all incoming faxes go into memory. When the mode is
deactivated, any stored faxes are printed.
Activating secure receiving mode
1.
Press
Fax
.
2.
Press
Menu
(
)
and then press
OK
when
Fax Feature
appears on the
bottom line of the display.
3.
Press the left/right arrow until
Secure Receive
appears and press
OK
.
4.
Press the left/right arrow until
On
appears and press
OK
.
5.
Enter a four-digit password you want to use and press
OK
.
6.
Re-enter the password to confirm it and press
OK
.
7.
Press
Stop/Clear (
)
to return to Ready mode.
When a fax is received in secure receiving mode, your printer stores it in
memory and shows
Secure Receive
to let you know that there is a fax
received.
Printing received faxes
1.
Access the
Secure Receive
menu by following steps 1 through 3 in
“Activating secure receiving mode.”
2.
Press the left/right arrow until
appears and press
OK
.
3.
Enter the four-digit password and press
OK
.
The printer prints all of the faxes stored in memory.
Deactivating secure receiving mode
1.
Access the
Secure Receive
menu by following steps 1 through 3 in
“Activating secure receiving mode.”
2.
Press the left/right arrow until
Off
appears and press
OK
.
3.
Enter the four-digit password and press
OK
.
The mode is deactivated and the printer prints all faxes stored in
memory.
4.
Press
Stop/Clear (
)
to return to Ready mode.
Receiving faxes in memory
Since your printer is a multi-tasking device, it can receive faxes while you
are making copies or printing. If you receive a fax while you are copying or
printing, your printer stores incoming faxes in its memory. Then, as soon as
you finish copying or printing, the printer automatically prints the fax.
Also, your printer receives faxes and stores them in its memory when there
is no paper in the tray or no toner in the installed toner cartridge.
OTHER WAYS TO FAX
Sending a fax to multiple destinations
You can use the Multiple Send feature, which allows you to send a fax to
multiple locations. Originals are automatically stored in memory and sent to
a remote station. After transmission, the originals are automatically erased
from memory. You cannot send a color fax using this feature.
1.
Press
Fax
.
2.
Load originals face up into the DADF, or place a single original face
down on the scanner glass.
For details about loading an original, see "Loading originals" on
3.
Adjust the document resolution and darkness to suit your fax needs. See
"Adjusting the document settings" on page 43.
4.
Press
Menu
(
)
until
Fax Feature
appears on the bottom line of the
display and press
OK
.
5.
Press the left/right arrow until
Multi Send
appears and press
OK
.
6.
Enter the number of the first receiving fax printer and press
OK
.
You can use speed buttons, speed dial numbers. You can enter Group
Dial Number using
Address Book
Button. For details, see "Setting up
7.
Enter the second fax number and press
OK
.
The display asks you to enter another fax number to send the document.
8.
To enter more fax numbers, press
OK
when
Yes
appears and repeat
steps 6 and 7. You can add up to 10 destinations.
9.
When you have finished entering fax numbers, press the left/right arrow
to select
No
at the
Another No.?
prompt and press
OK
.
The original is scanned into memory before transmission. The display
shows memory capacity and the number of pages being stored in
memory.
10.
If an original is placed on the scanner glass, select
Yes
to add another
pages. Load another original and press
OK
.
When you have finished, select
No
at the
Another Page?
prompt.
The printer begins sending the fax to the numbers you entered in the
order in which you entered them.
Sending a delayed fax
You can set your printer to send a fax at a later time when you will not be
present. You cannot send a color fax using this feature.
1.
Press
Fax
.
2.
Load originals face up into the DADF, or place a single original face
down on the scanner glass.
For details about loading an original, see "Loading originals" on
3.
Adjust the document resolution and darkness to suit your fax needs. See
"Adjusting the document settings" on page 43.
4.
Press
Menu
(
)
until
Fax Feature
appears on the bottom line of the
display and press
OK
.
5.
Press the left/right arrow until
Delay Send
appears and press
OK
.
6.
Enter the number of the receiving printer using the number keypad.
You can use speed buttons, speed dial numbers. You can enter Group
Dial Number using
Address Book
Button.For details. See "Setting up
•
DRPD must be set up again if you re-assign your fax number, or
connect the printer to another telephone line.
•
After DRPD has been set up, call your fax number again to verify
that the printer answers with a fax tone. Then have a call placed to
a different number assigned to that same line to be sure the call is
forwarded to the extension telephone or answering printer plugged
into the EXT socket.
You can activate secure receiving mode without setting a
password, but cannot protect your faxes.
Once you entered a group dial number, you cannot enter another
group dial numbers anymore.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
Инструкции и руководства похожие на DELL 2145cn
