Инструкция для DELL 2145cn

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

Maintenance

 

|

 59

2.

Grasp the handles on the toner cartridge and pull to remove the 

cartridge from the printer.

3.

Holding both handles on the toner cartridge, thoroughly rock it from side 

to side to evenly distribute the toner. 

4.

Slide the toner cartridge back into the printer.

5.

Close the front cover. Ensure the cover is securely latched.

REPLACING THE TONER CARTRIDGE

The printer uses four colors and has a different toner cartridge for each one: 

yellow (Y), magenta (M), cyan (C), and black (K).

The status LED and the toner-related message on the display indicates 

which each individual toner cartridge should be replaced.

Incoming faxes are saved in memory.

At this stage, the toner cartridge needs to be replaced. Check the type of 

toner cartridge for your printer (see "Supplies" on page 83).

1.

Turn the printer off, then wait a few minutes for the printer to cool.

2.

Using the handle, completely open the front cover.

When you open the front cover, be careful not to touch the 

underneath of the control panel (the lower part of the fuser unit). The 

temperature of the fuser unit might be high and could damage your 

skin.

When you open the front cover and work inside the printer, it is highly 

recommend that you remove the paper transfer belt first. Because the 

work you do could contaminate the paper transfer belt.

If toner gets on your clothing, wipe it off with a dry

cloth and wash it in cold water. Hot water sets toner into

fabric.

If the front cover is not completely closed, the printer will not 

operate.

Do not touch the green surface, the OPC drum or the front of 

each toner cartridge, with your hands or any other material. Use 

the handle on each cartridge in order to avoid touching this area.

Be careful not to scratch the surface of the paper transfer belt.

If you leave the front cover open for more than a few minutes, the 

OPC drum can be exposed to light. This will cause damage to the 

OPC drum. Close the front cover should the installation need to 

be halted for any reason.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
Оглавление инструкции

Document Outline