n
Loewe SoundVision ID
- 33 -
Deutsch
English
Français
Italiano
Español
Nederlands
Dansk
Suomi
Svenska
Navigation in the menu
These instructions for use describe the control of the unit via the touch
screen. The symbols in the left column of these instructions for use refer
to the symbols on the touch screen display. Functions are selected and
set by wiping gestures with the finger over the touch screen display.
The control functions (without settings) can also be made by remote
control (page 27).
Main Menu
You can call up the various functions of the unit via the main Menu.
You can make all entries directly on the touch screen by tapping on the
symbols with your finger.
Call up the
Main Menu
.
Back in menu.
Options menu
Customise
SoundVision ID
to your needs. The
Options
menu is context
sensitive, i.e. it displays different functions depending on the situation
from which it was called up.
Call up
Options
menu.
Setting the language
Set the desired menu language.
Call up
Options
from the Main Menu.
Call up
Settings
menu.
Select
International
option (second line from above)
Select desired
Language
.
Confirm selection with
Set
.
Confirm prompt with
Restart
.
Network
Depending on whether the device is connected by wire (Ethernet,
Powerline)
or wireless (WiFi), different settings have to be made.
➠
Loewe recommends use of a wired network (Ethernet, Powerline)
to ensure a high stability and quality of the data link. As a matter
of principle, wireless connections can get disturbed due to external
influences (e.g. microwave devices) and mostly provide a lower
data transmission rate.
Network Settings
You can make the settings for the selected network here.
Call up
Options
menu.
Call up the
Settings
menu.
Select the
Network
option.
You can see the current network settings. After the
first commissioning at the factory, your unit is set for a
wired connection and automatic IP configuration. If an
IP address is displayed in the network settings, a cor-
rect Internet connection is usually present and nothing
further has to be set.
If the unit does not have an Internet connection, change
the network settings.
Wired network
Call up
Change Settings
.
Select desired
Connection - wired
for the network
connection.
Confirm selection with
Proceed
.
Select desired
IP configuration
.
automatic
If a DHCP server is present in your home network
(e.g. a DSL router), use this setting, as all network
parameters are set automatically.
manual
The network parameters can be set manually (e.g. if
there is no DHCP server in your home network).
Confirm selection with
Proceed
.
The network parameters determined are displayed in
the overview in the
automatic
option.
Enter network parameters in the displayed data fields
with the
manual
optioon.
Proceed
Confirm selection with
Proceed
.
n
Instructions for Use
Start-up