Chapter 14 Mirroring
GS3700/XGS3700 Series User’s Guide
135
14.1.5 Connected Port
Use this screen to select the RMirror VLAN and specify the port(s) that helps forward mirrored
traffic to other connected switches and/or receive mirrored traffic from other connected port in the
same RMirror VLAN.
Click the Connected Port link in the RMirror screen. The following screen opens.
Figure 84
Advanced Application > Mirroring > RMirror > Connected Port
Tagging
Select whether to add the RMirror VLAN tag to mirrored traffic on the monitor port.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
VLAN
This field displays the ID number of RMirror VLAN over which the mirrored traffic is
forwarded.
Monitor Port
This field displays the number of port that receives the mirrored traffic from the source
device for analysis.
Tagging
This field displays whether the mirrored traffic is tagged with the RMirror VLAN ID.
Delete
Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 58
Advanced Application > Mirroring > RMirror > Destination (continued)
LABEL
DESCRIPTION