Chapter 43 Access Control
GS3700/XGS3700 Series User’s Guide
355
reset
zySysMgmtUncontrolledSyste
mReset
1.3.6.1.4.1.890.1.15.3.49.2.1
This trap is sent when the Switch
automatically resets.
zySysMgmtControlledSystem
Reset
1.3.6.1.4.1.890.1.15.3.49.2.2
This trap is sent when the Switch resets
by an administrator through a
management interface.
zySysMgmtBootImageInconsi
stence
1.3.6.1.4.1.890.1.15.3.49.2.3
This trap is sent when the index number
of image which is loaded when the Switch
starts up is different from what is
specified via the CLI.
RebootEvent
1.3.6.1.4.1.890.1.5.1.1.2
This trap is sent when the Switch reboots
by an administrator through a
management interface.
timesync
zyDateTimeTrapTimeServerNo
tReachable
1.3.6.1.4.1.890.1.15.3.82.3.1
This trap is sent when the Switch’s date
and time is not manually entered or the
specified time server is not reachable.
intrusionloc
k
zyPortIntrusionLock
1.3.6.1.4.1.890.1.15.3.61.3.2
This trap is sent when intrusion lock
occurs on a port.
loopguard
zyLoopGuardLoopDetect
1.3.6.1.4.1.890.1.15.3.45.2.1
This trap is sent when loopguard shuts
down a port.
errdisable
zyErrdisableDetect
1.3.6.1.4.1.890.1.15.3.24.4.1
This trap is sent when an error is
detected on a port, such as a loop occurs
or the rate limit for specific control
packets is exceeded.
zyErrdisableRecovery
1.3.6.1.4.1.890.1.15.3.24.4.2
This trap is sent when the Switch ceases
the action taken on a port, such as
shutting down the port or discarding
packets on the port, after the specified
recovery interval.
dyinggasp
zyHwMonitorDyingGasp
1.3.6.1.4.1.890.1.15.3.26.2.5
The trap is sent when the device power
goes below the normal value.
Table 188
SNMP System Traps (continued)
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
Table 189
SNMP InterfaceTraps
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
linkup
linkUp
1.3.6.1.6.3.1.1.5.4
This trap is sent when the Ethernet
link is up.
linkdown
linkDown
1.3.6.1.6.3.1.1.5.3
This trap is sent when the Ethernet
link is down.
autonegotiation zyPortAutonegotiationFailed
1.3.6.1.4.1.890.1.15.3.61.3.1
This trap is sent when an Ethernet
interface fails to auto-negotiate with
the peer Ethernet interface.
lldp
lldpRemTablesChange
1.0.8802.1.1.2.0.0.1
The trap is sent when entries in the
remote database have any updates.
Link Layer Discovery Protocol
(LLDP), defined as IEEE 802.1ab,
enables LAN devices that support
LLDP to exchange their configured
settings. This helps eliminate
configuration mismatch issues.