Chapter 15 Link Aggregation
GS3700/XGS3700 Series User’s Guide
139
The following table describes the labels in this screen.
15.4 Link Aggregation Setting
Click Advanced Application > Link Aggregation > Link Aggregation Setting to display the
screen shown next. See
for more information on link aggregation.
Table 62
Advanced Application > Link Aggregation Status
LABEL
DESCRIPTION
Group ID
This field displays the group ID to identify a trunk group, that is, one logical link containing
multiple ports.
Enabled Port
These are the ports you have configured in the Link Aggregation screen to be in the trunk
group.
The port number(s) displays only when this trunk group is activated and there is a port
belonging to this group.
Synchronized
Ports
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Aggregator ID
Link Aggregator ID consists of the following: system priority, MAC address, key, port
priority and port number. Refer to
for more information on this
field.
The ID displays only when there is a port belonging to this trunk group and LACP is also
enabled for this group.
Criteria
This shows the outgoing traffic distribution algorithm used in this trunk group. Packets from
the same source and/or to the same destination are sent over the same link within the
trunk.
src-mac means the Switch distributes traffic based on the packet’s source MAC address.
dst-mac means the Switch distributes traffic based on the packet’s destination MAC
address.
src-dst-mac means the Switch distributes traffic based on a combination of the packet’s
source and destination MAC addresses.
src-ip means the Switch distributes traffic based on the packet’s source IP address.
dst-ip means the Switch distributes traffic based on the packet’s destination IP address.
src-dst-ip means the Switch distributes traffic based on a combination of the packet’s
source and destination IP addresses.
Status
This field displays how these ports were added to the trunk group. It displays:
•
Static - if the ports are configured as static members of a trunk group.
•
LACP - if the ports are configured to join a trunk group via LACP.