Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
74
Figure 38
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
The following table describes the labels in this screen.
6.9.7 IPv6 Neighbor Discovery Setup
Use this screen to configure neighbor discovery settings for each interface. Click the link next to
IPv6 Neighbor Discovery Setup in the IPv6 Configuration screen to display the screen as
shown next.
Table 23
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
LABEL
DESCRIPTION
Interface
Select the IPv6 interface you want to configure.
IPv6 Global Address
Manually configure a static IPv6 global address for the interface.
Prefix Length
Specify an IPv6 prefix length that specifies how many most significant bits (start from
the left) in the address compose the network address.
EUI-64
Select this option to have the interface ID be generated automatically using the EUI-
64 format.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to reset the fields to the factory defaults.
Index
This is the interface index number. Click on an index number to change the settings.
Interface
This is the name of the IPv6 interface you created.
IPv6 Global Address/
Prefix Length
This field displays the IPv6 global address and prefix length for the interface.
EUI-64
This shows whether the interface ID of the global address is generated using the EUI-
64 format.
Delete
Check the entry(ies) that you want to remove in the Delete column and then click
Delete to remove the selected entry(ies) from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.