Chapter 43 Access Control
GS3700/XGS3700 Series User’s Guide
354
43.3.2 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, RFC 2012
SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP
43.3.3 SNMP Traps
The Switch sends traps to an SNMP manager when an event occurs. The following tables outline the
SNMP traps by category.
An OID (Object ID) that begins with “1.3.6.1.4.1.890.1.15” is defined in private MIBs. Otherwise,
it is a standard MIB OID.
Table 188
SNMP System Traps
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
coldstart
coldStart
1.3.6.1.6.3.1.1.5.1
This trap is sent when the Switch is
turned on.
warmstart
warmStart
1.3.6.1.6.3.1.1.5.2
This trap is sent when the Switch
restarts.
fanspeed
zyHwMonitorFanSpeedOutOfR
ange
1.3.6.1.4.1.890.1.15.3.26.2.1
This trap is sent when the fan speed goes
above or below the normal operating
range.
poe
(For PoE
models
only)
zyPoePowerPortOverload
1.3.6.1.4.1.890.1.15.3.59.4.1
This trap is sent when the port is turned
off to supply power due to overloading.
zyPoePowerPortShortCircuit
1.3.6.1.4.1.890.1.15.3.59.4.2
This trap is sent when the port is turned
off to supply power due to short circuit.
zyPoePowerPortOverSystemB
udget
1.3.6.1.4.1.890.1.15.3.59.4.3
This trap is sent when the port is turned
off to supply power because the
requested power exceeds the total PoE
power budget on the Switch.
temperature zyHwMonitorTemperatureOut
OfRange
1.3.6.1.4.1.890.1.15.3.26.2.2
This trap is sent when the temperature
goes above or below the normal
operating range.
voltage
zyHwMonitorPowerSupplyVolt
ageOutOfRange
1.3.6.1.4.1.890.1.15.3.26.2.3
This trap is sent when the voltage goes
above or below the normal operating
range.