Chapter 7 VLAN
GS3700/XGS3700 Series User’s Guide
87
The following table describes the related labels in this screen.
Table 32
Advanced Application > VLAN > Static VLAN
LABEL
DESCRIPTION
ACTIVE
Select this check box to activate the VLAN settings.
Name
Enter a descriptive name for the VLAN group for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
VLAN Group ID
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
VLAN Type
Select Normal (static) or Private. For Private VLANs, select Primary, Isolated or
Community.
Association VLAN
List
Primary private VLANs can associate with several (secondary) Community private VLANs
and up to one (secondary) Isolated private VLAN.
You only configure VLAN Association List for Primary private VLANs. Use a dash to
associate consecutive VLANs and a comma (no spaces) to associate non-consecutive
VLANs. For example, 51-53 includes 51, 52 and 53, but 51,53 does not include 52.
Secondary private VLANs can only be associated with one primary private VLAN.
Port
The port number identifies the port you are configuring.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Control
Select Normal for the port to dynamically join this VLAN group using GVRP. This is the
default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Tagging
Select TX Tagging if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to reset the fields to the factory defaults.
VID
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
Active
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name
This field displays the descriptive name for this VLAN group.
VLAN Type
This field displays the Normal or Private (Primary, Isolated or Community) type VLAN
configured in the top part of this screen.
Association VLAN
List
This field displays which secondary private VLANs are associated with a primary private
VLAN configured in the top part of this screen.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.