Chapter 4 The Web Configurator
GS3700/XGS3700 Series User’s Guide
39
IPv6
This link takes you to a screen where you can enable an IPv6 interface and configure the
IPv6 settings on the Switch.
Advanced Application
VLAN
This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also configure a
protocol based VLAN or a subnet based VLAN in these screens.
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC addresses for a port.
These static MAC addresses do not age out.
Static Multicast
Forwarding
This link takes you to a screen where you can configure static multicast MAC addresses
for port(s). These static multicast MAC addresses do not age out.
Filtering
This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent
network loops.
Bandwidth Control This link takes you to screens where you can cap the maximum bandwidth allowed on a
port.
Broadcast Storm
Control
This link takes you to a screen to set up broadcast filters.
Mirroring
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
Link Aggregation
This link takes you to screen where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Port
Authentication
This link takes you to a screen where you can configure IEEE 802.1x port authentication
as well as MAC authentication for clients communicating via the Switch.
Port Security
This link takes you to a screen where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Classifier
This link takes you to a screen where you can configure the Switch to group packets
based on the specified criteria.
Policy Rule
This link takes you to a screen where you can configure the Switch to perform special
treatment on the grouped packets.
Queuing Method
This link takes you to a screen where you can configure queuing with associated queue
weights for each port.
VLAN Stacking
This link takes you to screens where you can activate and configure VLAN stacking.
Multicast
This link takes you to screen where you can configure various multicast features, IGMP
snooping and create multicast VLANs.
AAA
This link takes you to a screen where you can configure authentication, authorization and
accounting services via external servers. The external servers can be either RADIUS
(Remote Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller
Access-Control System Plus).
IP Source Guard
This link takes you to screens where you can configure filtering of unauthorized DHCP and
ARP packets in your network.
Loop Guard
This link takes you to a screen where you can configure protection against network loops
that occur on the edge of your network.
VLAN Mapping
This link takes you to screens where you can configure VLAN mapping settings on the
Switch.
Layer 2 Protocol
Tunneling
This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
settings on the Switch.
sFlow
This link takes you to screens where you can configure sFlow settings on the Switch.
Table 5
Navigation Panel Links (continued)
LINK
DESCRIPTION