Chapter 36 Policy Routing
GS3700/XGS3700 Series User’s Guide
302
Figure 196
IP Application > Policy Routing
The following table describes the labels in this screen.
36.2.1 Policy Routing Rule Configuration
You must first configure a layer-3 classifier in the Classifier screen (see
and a policy routing profile in the Policy Routing screen (see
).
Use this screen to configure a policy route to override the default (shortest path) routing behavior
and forward packets based on the classifier and action you specify. A policy route rule defines the
matching classifier and the action to take when a packet meets the criteria in the classifier. The
action is taken only when all the criteria are met. Policy-based routing is applied to incoming
packets on a per interface basis before normal routing. The Switch does not perform normal routing
on packets that match any of the policy routes.
Table 157
IP Application > Policy Routing
LABEL
DESCRIPTION
Active
This field allows you to activate/deactivate this policy routing profile and rules in the profile.
Profile Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Spaces are allowed.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to reset the fields to your previous configuration.
Clear Click
Clear to set the above fields back to the factory defaults.
Index
This field displays the index number of the policy routing profile. Click a number to edit the
policy routing profile entry.
Active
This field displays Yes when the policy routing profile is activated and No when it is
deactivated.
Profile Name
This field displays the descriptive name for this profile. This is for identification purposes
only.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.