20
Creating a Sequence
There are two ways to create or edit a Sequence with Trigger Finger Pro:
(A)
using the pads in
real time or
(B)
using the Step Switches.
To record a Sequence in real time:
1.
Press Trigger Finger Pro's
Record
button. Its Sequencer is record-armed.
2.
If the Sequence is not already playing, press
Play
to start recording.
3.
Hit the pads to record their sounds as steps in the Sequence. You can play (and therefore
record) multiple pads simultaneously. The pads' velocities will also be recorded. The
recording Sequence will loop until you stop it.
4.
To stop recording, press the
Record
button.
5.
To stop playback, press the
Stop
button.
To enter or erase steps in a Sequence:
1.
Enter Sequence Mode by pressing the
Sequence Mode (Seq)
button.
2.
Press the pad whose sound you want to use in the current bar. The pad number will
appear in the display, and any steps for that pad in that bar will appear in the Step
Switches.
3.
To add a step to the current bar for that pad, press an
unlit
Step Switch
.
To remove a step from the current bar for that pad, press a
lit
Step Switch
.
4.
Make other changes, or exit Sequence Mode by pressing the
Sequence Mode (Seq)
button or fourth
Function Button (Exit)
.
.
