38
MIDI Channel and Output
The MIDI settings determine over which MIDI channel each pad sends its messages and
whether the messages are sent over Trigger Finger Pro's USB Port, MIDI Out jack, or both.
To change a pad's MIDI channel and output configuration:
1.
Enter Pad Mode by pressing the
Pad Mode Button (Pad)
.
2.
Press the second
Function Button (Edit Pads)
.
3.
Press the third
Function Button (More)
.
4.
Use the
Pad Bank
button to select the desired pad bank, and press the pad whose
velocities you want to edit.
5.
Turn the fourth
Assignable Knob (MIDI-Ch)
to set the MIDI channel over which the pad
will send its messages (
01
–
16
or
UsePrefs
).
Press the first
Function Button (Output)
to cycle through the available MIDI output
configurations the pad can send its messages (
USB+Jack
,
USB
,
Jack
, or
UsePrefs
).
(
Jack
refers to Trigger Finger Pro's
MIDI Out
jack.)
For either setting, when
UsePrefs
is selected, the pad will use whatever settings are in
Trigger Finger Pro's
Preferences
. See the
chapter to learn more
about this.
6.
Make other changes in Pad Mode, or exit Pad Mode by pressing the
Pad Mode Button
(Pad)
or the fourth
Function Button (Exit)
twice.
TRIGGER PADS 01: Preset
PAD ON:
Green
PAD OFF:
Indigo
MIDI-CH:
UsePrefs
MORE EXIT
BANK:A PAD:A01 SELECT->
PAD
OUTPUT:
UsePrefs
