70
Swing
The Swing setting determines the amount of swing—a "shuffle" or triplet-based feel—that is
applied to the Sequence.
Important:
The Swing setting is affected by the Time Division. Furthermore, if your Time
Division is triplet-based, Swing will not be applied.
To set the Swing of a Sequence:
1.
Enter Sequence Mode by pressing the
Sequence Mode (Seq)
button.
2.
Turn the second
Knob (Swing)
to adjust the value:
•
75%
is the maximum setting (completely swung)
•
50%
is the minimum setting (no swing; this is the default setting)
3.
Exit Sequence Mode by pressing the
Sequence Mode (Seq)
button or fourth
Function
Button (Exit)
.
SEQUENCER 01: Sequence
TEMPO:
120
SWING:
50%
GATE
50%
FIX VEL:
127
EDIT
VELOCITY
PAGE:
1 of 2
EXIT
BANK:A BAR:01 PAD:A01 CHANGE->
SEQUENCE
BARS:
02
