Chapter 22 Multicast
GS3700/XGS3700 Series User’s Guide
195
Figure 123
Advanced Application > Multicast > Multicast Setup > MVR
The following table describes the related labels in this screen.
Table 94
Advanced Application > Multicast > Multicast Setting > MVR
LABEL
DESCRIPTION
Active
Select this check box to enable MVR to allow one single multicast VLAN to be shared
among different subscriber VLANs on the network.
Group Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Multicast VLAN
ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority
Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP or
MLD control packets (belonging to this multicast VLAN).
Mode
Specify the MVR mode on the Switch. Choices are Dynamic and Compatible.
Select Dynamic to send IGMP reports or MLD messages to all MVR source ports in the
multicast VLAN.
Select Compatible to set the Switch not to send IGMP reports or MLD messages.
Port
This field displays the port number on the Switch.