Chapter 43 Access Control
GS3700/XGS3700 Series User’s Guide
357
43.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to go
back to the Access Control screen.
Table 191
SNMP IP Traps
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
ping
pingProbeFailed
1.3.6.1.2.1.80.0.1
This trap is sent when a single ping probe
fails.
pingTestFailed
1.3.6.1.2.1.80.0.2
This trap is sent when a ping test (consisting
of a series of ping probes) fails.
pingTestCompleted
1.3.6.1.2.1.80.0.3
This trap is sent when a ping test is
completed.
traceroute
traceRouteTestFailed
1.3.6.1.2.1.81.0.2
This trap is sent when a traceroute test fails.
traceRouteTestCompleted
1.3.6.1.2.1.81.0.3
This trap is sent when a traceroute test is
completed.
Table 192
SNMP Switch Traps
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
stp
STPNewRoot
1.3.6.1.2.1.17.0.1
This trap is sent when the STP root switch
changes.
zyMrstpNewRoot
1.3.6.1.4.1.890.1.15.3.52.3.1
This trap is sent when the MRSTP root
switch changes.
zyMstpNewRoot
1.3.6.1.4.1.890.1.15.3.53.3.1
This trap is sent when the MSTP root
switch changes.
STPTopologyChange
1.3.6.1.2.1.17.0.2
This trap is sent when the STP topology
changes.
zyMrstpTopologyChange
1.3.6.1.4.1.890.1.15.3.52.3.2
This trap is sent when the MRSTP topology
changes.
zyMstpTopologyChange
1.3.6.1.4.1.890.1.15.3.53.3.2
This trap is sent when the MSTP root
switch changes.
mactable
zyMacForwardingTableFull
1.3.6.1.4.1.890.1.15.3.48.2.1
This trap is sent when more than 99% of
the MAC table is used.
rmon
RmonRisingAlarm
1.3.6.1.2.1.16.0.1
This trap is sent when a variable goes over
the RMON "rising" threshold.
RmonFallingAlarm
1.3.6.1.2.1.16.0.2
This trap is sent when the variable falls
below the RMON "falling" threshold.
cfm
dot1agCfmFaultAlarm
1.3.111.2.802.1.1.8.0.1
The trap is sent when the Switch detects a
connectivity fault.