Chapter 5 ZON Utility, ZON Neighbor Management and Port Status
GS3700/XGS3700 Series User’s Guide
49
5.4.1 Status: Port Details
Click a number in the Port column in the Status screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
Figure 21
Status: Port Details
The following table describes the labels in this screen.
Table 8
Status > Port Details
LABEL
DESCRIPTION
Port Info
Port NO.
This field displays the port number you are viewing.
Name
This field displays the name of the port.
Link
This field displays the speed (such as 100M for 100Mbps, 1000M for 1000 Mbps, or 10G
for 10 Gbps) and the duplex (F for full duplex).
State
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
LACP
This field shows if LACP is enabled on this port or not.
TxPkts
This field shows the number of transmitted frames on this port