Инструкция для ZYXEL GS3700-48

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 4 The Web Configurator

GS3700/XGS3700 Series User’s Guide

IPv6

This link takes you to a screen where you can enable an IPv6 interface and configure the
IPv6 settings on the Switch.

Advanced Application

VLAN

This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also configure a
protocol based VLAN or a subnet based VLAN in these screens.

Static MAC
Forwarding

This link takes you to screens where you can configure static MAC addresses for a port.
These static MAC addresses do not age out.

Static Multicast
Forwarding

This link takes you to a screen where you can configure static multicast MAC addresses
for port(s). These static multicast MAC addresses do not age out.

Filtering

This link takes you to a screen to set up filtering rules.

Spanning Tree
Protocol

This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent
network loops.

Bandwidth Control This link takes you to screens where you can cap the maximum bandwidth allowed on a

port.

Broadcast Storm
Control

This link takes you to a screen to set up broadcast filters.

Mirroring

This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.

Link Aggregation

This link takes you to screen where you can logically aggregate physical links to form one
logical, higher-bandwidth link.

Port
Authentication

This link takes you to a screen where you can configure IEEE 802.1x port authentication
as well as MAC authentication for clients communicating via the Switch.

Port Security

This link takes you to a screen where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.

Classifier

This link takes you to a screen where you can configure the Switch to group packets
based on the specified criteria.

Policy Rule

This link takes you to a screen where you can configure the Switch to perform special
treatment on the grouped packets.

Queuing Method

This link takes you to a screen where you can configure queuing with associated queue
weights for each port.

VLAN Stacking

This link takes you to screens where you can activate and configure VLAN stacking.

Multicast

This link takes you to screen where you can configure various multicast features, IGMP
snooping and create multicast VLANs.

AAA

This link takes you to a screen where you can configure authentication, authorization and
accounting services via external servers. The external servers can be either RADIUS
(Remote Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller
Access-Control System Plus).

IP Source Guard

This link takes you to screens where you can configure filtering of unauthorized DHCP and
ARP packets in your network.

Loop Guard

This link takes you to a screen where you can configure protection against network loops
that occur on the edge of your network.

VLAN Mapping

This link takes you to screens where you can configure VLAN mapping settings on the
Switch.

Layer 2 Protocol
Tunneling

This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
settings on the Switch.

sFlow

This link takes you to screens where you can configure sFlow settings on the Switch.

Table 5

Navigation Panel Links (continued)