Chapter 24 IP Source Guard
GS3700/XGS3700 Series User’s Guide
218
Figure 137
IP Source Guard > Static Binding
The following table describes the labels in this screen.
Table 106
IP Source Guard > Static Binding
LABEL
DESCRIPTION
ARP Freeze
ARP Freeze allows you to automatically create static bindings from the current ARP
entries (either dynamically learned or static ARP entries) until the Switch’s binding
table is full.
Note: The ARP learning mode should be set to
ARP-Request
in the
IP Application >
ARP Setup > ARP Learning
screen before you use the ARP Freeze feature.
Condition
All - Select this and click ARP Freeze to have the Switch automatically add all the
current ARP entries to the static bindings table.
Port List - Select this and enter the number of the port(s) (separated by a comma).
ARP entries learned on the specified port(s) are added to the static bindings table
after you click ARP Freeze.
VLAN List - Select this and enter the ID number of the VLAN(s) (separated by a
comma). ARP entries for the specified VLAN(s) are added to the static bindings table
after you click ARP Freeze.
Static Binding
MAC Address
Enter the source MAC address in the binding.
IP Address
Enter the IP address assigned to the MAC address in the binding.
VLAN
Enter the source VLAN ID in the binding.