Chapter 2 Hardware Installation and Connection
GS3700/XGS3700 Series User’s Guide
26
7
Slide the rear bracket along the rail and set the bracket in place depending on the depth of the rack.
The rear brackets can be used with a 19-inch rack.
You may now mount the Switch on a rack. Proceed to the next section.
2.5 Mounting the Switch on a Rack
Use the M6 rack screws (larger than the M4 screws) to mount the Switch with brackets on the rack.
1
Position a front mounting bracket (that is already attached to the Switch) on one side of the rack,
lining up the two screw holes on the bracket with the screw holes at the front of the rack.
2
Use a screwdriver to install the rack screws through the mounting bracket holes into the rack.
3
to attach the other front mounting bracket on the other side of the rack.
4
Position a rear mounting bracket (that is already attached to the Switch) on one side of the rack,
lining up the two screw holes on the bracket with the screw holes at the rear of the rack.
5
Use a screwdriver to install the rack screws through the mounting bracket holes into the rack.
6
to attach the other rear mounting bracket on the other side of the rack.
Front Bracket
Sliding Rail
Rear Bracket