Инструкция для ZYXEL GS3700-48

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 7 VLAN

GS3700/XGS3700 Series User’s Guide

The following table describes the labels in this screen.

7.5.6.2 Create an IP-based VLAN Example

This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these
steps using the screen below:

Activate this protocol based VLAN.

Type the port number you want to include in this protocol based VLAN. Type 1.

Give this protocol-based VLAN a descriptive name. Type IP-VLAN.

Select the protocol. Leave the default value IP.

Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID
of 5. Type 5.

Table 35

Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN Setup

LABEL

DESCRIPTION

Active

Select this check box to activate this protocol based VLAN.

Port

Type a port number to be included in this protocol based VLAN.

This port must belong to a static VLAN in order to participate in a protocol based VLAN. See

Chapter 7 on page 81

for more details on setting up VLANs.

Name

Enter up to 32 alphanumeric characters to identify this protocol based VLAN.

Ethernet-type

Use the drop down list box to select a predefined protocol to be included in this protocol
based VLAN or select Others and type the protocol number in hexadecimal notation. For
example, the IP protocol in hexadecimal notation is 0800, and Novell IPX protocol is 8137.

Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed to be

used for protocol based VLANs.

VID

Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN which you
defined in the Advanced Application > VLAN > Static VLAN screen.

Priority

Select the priority level that the Switch will assign to frames belonging to this VLAN.

Add

Click this to create a new entry or to update an existing one.

This saves your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Index

This is the index number identifying this protocol based VLAN. Click on any of these
numbers to edit an existing protocol based VLAN.

Active

This field shows whether the protocol based VLAN is active or not.

Port

This field shows which port belongs to this protocol based VLAN.

Name

This field shows the name the protocol based VLAN.

Ethernet-type

This field shows which Ethernet protocol is part of this protocol based VLAN.