Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
78
6.9.10 IPv6 Neighbor Setup
Use this screen to create a static IPv6 neighbor entry in the Switch’s IPv6 neighbor table to store
the neighbor information permanently. Click the link next to IPv6 Neighbor Setup in the IPv6
Configuration screen to display the screen as shown next.
Figure 42
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Setup
Preferred Lifetime
Specify how long (from 0 to 4294967295 seconds) that addresses generated from the
prefix via stateless address autoconfiguration remain preferred.
The preferred lifetime cannot exceed the valid lifetime.
Flags
Select No-Autoconfig Flag to not allow IPv6 hosts to use this prefix for stateless
address autoconfiguration.
Select No-Onlink Flag to not allow the specified prefix to be used for on-link
determination.
Select No-Advertise Flag to set the Switch to not include the specified IPv6 prefix,
prefix length in router advertisements for this interface.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the nonvolatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to reset the fields to the factory defaults.
Index
This is the interface index number. Click on an index number to change the settings.
Interface
This is the name of the IPv6 interface you created.
Prefix/Prefix Length
This field displays the IPv6 prefix and prefix length that the Switch includes in router
advertisements for this interface.
Valid Lifetime
This field displays the IPv6 prefix valid lifetime.
Preferred Lifetime
This field displays the preferred lifetime of an IPv6 address generated from the prefix.
Delete
Check the entry(ies) that you want to remove in the Delete column and then click
Delete to remove the selected entry(ies) from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.
Table 26
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup (continued)
LABEL
DESCRIPTION