Chapter 23 AAA
GS3700/XGS3700 Series User’s Guide
206
Figure 133
Advanced Application > AAA > AAA Setup
The following table describes the labels in this screen.
Table 99
Advanced Application > AAA > AAA Setup
LABEL
DESCRIPTION
Authentication
Use this section to specify the methods used to authenticate users accessing the Switch.
Privilege Enable
These fields specify which database the Switch should use (first, second and third) to
authenticate access privilege level for administrator accounts (users for Switch
management).
Configure the access privilege of accounts via commands (see the Ethernet Switch CLI
Reference Guide) for local authentication. The TACACS+ and RADIUS are external
servers. Before you specify the priority, make sure you have set up the corresponding
database correctly first.
You can specify up to three methods for the Switch to authenticate the access privilege
level of administrators. The Switch checks the methods in the order you configure them
(first Method 1, then Method 2 and finally Method 3). You must configure the settings
in the Method 1 field. If you want the Switch to check other sources for access privilege
level specify them in Method 2 and Method 3 fields.
Select local to have the Switch check the access privilege configured for local
authentication.
Select radius or tacacs+ to have the Switch check the access privilege via the external
servers.