Инструкция для ZYXEL GS3700-48

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 29 PPPoE

GS3700/XGS3700 Series User’s Guide

250

The 1 in the first field identifies this as an Agent Circuit ID sub-option and 2 identifies this as an
Agent Remote ID sub-option. The next field specifies the length of the field. The Switch takes the
Circuit ID string you manually configure for a VLAN on a port as the highest priority and the Circuit
ID string for a port as the second priority. In addition, the Switch puts the PPPoE client’s MAC
address into the Agent Remote ID Sub-option if you do not specify any user-defined string.

29.1.2.1 Flexible Circuit ID Syntax with Identifier String and Variables

If you do not configure a Circuit ID string for a VLAN on a specific port or for a specific port, the
Switch adds the user-defined identifier string and variables into the Agent Circuit ID Sub-option.
The variables can be the slot ID of the PPPoE client, the port number of the PPPoE client and/or the
VLAN ID on the PPPoE packet.

The identifier-string, slot ID, port number and VLAN ID are separated from each other by a pound
key (#), semi-colon (;), period (.), comma (,), forward slash (/) or space. An Agent Circuit ID Sub-
option example is “Switch/07/0123” and indicates the PPPoE packets come from a PPPoE client
which is connected to the Switch’s port 7 and belong to VLAN 123.

29.1.2.2 WT-101 Default Circuit ID Syntax

If you do not configure a Circuit ID string for a specific VLAN on a port or for a specific port, and
disable the flexible Circuit ID syntax in the PPPoE > Intermediate Agent screen, the Switch
automatically generates a Circuit ID string according to the default Circuit ID syntax which is
defined in the DSL Forum Working Text (WT)-101. The default access node identifier is the host
name of the PPPoE intermediate agent and the eth indicates “Ethernet”.

29.1.3 Port State

Every port is either a trusted port or an untrusted port for the PPPoE intermediate agent. This
setting is independent of the trusted/untrusted setting for DHCP snooping or ARP inspection. You
can also specify the agent sub-options (circuit ID and remote ID) that the Switch adds to PADI and
PADR packets from PPPoE clients.

Table 126

PPPoE IA Remote ID Sub-option Format

SubOpt

Length

Value

0x02

(1 byte)

MAC Address or String

(63 bytes)

Table 127

PPPoE IA Circuit ID Sub-option Format: Using Identifier String and Variables

SubOpt