Инструкция для ZYXEL GS3700-48

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 26 VLAN Mapping

GS3700/XGS3700 Series User’s Guide

240

Figure 156

VLAN Mapping Configuration

The following table describes the labels in this screen.

Table 120

VLAN Mapping Configuration

LABEL

DESCRIPTION

Active

Check this box to activate this rule.

Name

Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.

Port

Type a port to be included in this rule.

VID

Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the packets and will be
translated into the VID you specified in the Translated VID field.

Translated VID

Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in the packets will
be translated.

Priority

Select a priority level (from 0 to 7). This is the priority level that replaces the customer
priority level in the tagged packets or adds to the untagged packets.

Add

Click this to create a new entry or to update an existing one.

This saves your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.

Cancel

Click Cancel to reset the fields to your previous configuration.

Index

This is the number of the VLAN mapping entry in the table. Click on an index number to
change the settings.

Active

This shows whether this entry is activated or not.

Name

This is the descriptive name for this rule.

Port

This is the port number to which this rule is applied.

VID

This is the customer VLAN ID in the incoming packets.