![background image](/i/zyxel/147274/zyxel-gs3700-48hp/h/zyxel-gs3700-48hp-120.png)
Chapter 11 Spanning Tree Protocol
GS3700/XGS3700 Series User’s Guide
120
11.8.1 Multiple Spanning Tree Protocol Port Configuration
To configure MSTP ports, click Port in the Advanced Application > Spanning Tree Protocol >
MSTP screen.
Enabled VLAN(s)
This field displays which VLAN(s) are mapped to this MST instance.
Port
This field displays the port number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to add this port to the MST instance.
Priority
Configure the priority for each port here.
Priority decides which port should be disabled when more than one port forms a loop in
the Switch. Ports with a higher priority numeric value are disabled first. The allowed range
is between 0 and 255 and the default value is 128.
Path Cost
Path cost is the cost of transmitting a frame on to a LAN through that port. It is
recommended to assign this value according to the speed of the bridge. The slower the
media, the higher the cost - see
for more information.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses this change if
it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Instance
This field displays the ID of an MST instance.
VLAN
This field displays the VID (or VID ranges) to which the MST instance is mapped.
Active Port
This field display the ports configured to participate in the MST instance.
Delete
Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 48
Advanced Application > Spanning Tree Protocol > MSTP (continued)
LABEL
DESCRIPTION