Special Recording Modes
106
Activating Interval Recording Mode and Recording
1 Open the [Special Rec] submenu.
[
4K/2K/MXF Setup]
>
[Special Rec]
2 Select [Interval Rec] and then press SET.
• [INT STBY
`
] (during 4K and 2K modes) or [INT STBY] (during MXF
mode) appears at the top of the screen (with [INT] flashing).
3 Press the START/STOP button to begin recording.
• The set number of frames are recorded automatically at the set interval.
• The tally lamp illuminates.
• [INT] changes to [
Ü
INT] while recording frames.
4 Press the START/STOP button again to stop recording.
• All of the recorded frames are joined together into one clip.
• [INT STBY
`
] (during 4K and 2K modes) or [INT STBY] (during MXF mode) appears at the top of the screen
(with [INT] flashing).
• The tally lamp goes out.
NOTES
• You can use only one special recording mode at a time.
• While recording, you cannot change the interval or number of frames.
• Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
• Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the video configuration.
• During this special recording mode, the running mode of the time code (
A
84) can be set to [Rec Run] or
[Regen.]*. The time code advances by the number of frames recorded. If the running mode of the time code
(
A
84) is set to [Free Run] or the time code is input from an external source, the running mode will switch to
[Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will
return to its previous setting.
• During special recording mode, the time code signal will not be output from the MON. terminals, TIME CODE
terminal or HD/SD SDI terminal. During 4K and 2K modes, the time code signal will be output from the 3G-SDI
terminals.
* During MXF mode only.
Frame Recording Mode
Set the number of frames in advance. We recommend operating the camera remotely or stabilizing the camera,
for example, on a tripod. Sound is not recorded in this mode. During 4K and 2K modes, MXF clips will not be
recorded simultaneously on a CF card even if a card is inserted in the camera.
Operating modes:
[
4K/2K/MXF Setup]
[
Special Rec]
[Off]
COP
Y
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
