Инструкция для CANON EOS C500

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

191

Troubleshooting

Cannot record

- Cannot record on a CF card. The file control information is corrupted or there was an encoder error. Turn off the 

camera and back on again. Then, remove the CF card being used and reinsert it. Alternatively, replace the CF card. If 
this does not solve the problem, consult a Canon Service Center.
• Corrupted file control information cannot be recovered. CF cards or clips with corrupt file control information cannot 

be read by the supplied Canon XF Utility or plugins.

Cannot switch CF card slots

- The SLOT SELECT button was pressed while the camera is recording. Wait until recording is finished to change the 

selected CF card slot. 

CF A/CF B Buffer overflow. Recording was stopped.

- The data transfer rate was too high for the CF card in use and the recording was stopped. Use a recommended card 

(

A

43).

CF A/CF B Cannot restore

- Could not recover data on the CF card. Save your clips (

A

153) and initialize the CF card (

A

45).

CF A/CF B error

- The CF card cannot be recognized or cannot be accessed. Check that the CF card is inserted correctly and not 

malfunctioning. 

CF A/CF B Management data is not supported and will be deleted

- This message may appear if you insert into the camera a CF card that was initialized by a Canon professional 

camcorder. Check the contents of the CF card.

CF A/CF B Management file error   Cannot record

- Cannot record because the camera cannot write to the file control information. This may occur if the files on the CF 

card were accessed using another device. Save your clips (

A

153) and initialize the CF card (

A

45).

• During double slot recording, both “CF A” and “CF B” will appear in the message.

CF A/CF B Media full

- If either “CF A” or “CF B” appears in the message: CF card A or CF card B is full so recording will not start. Switch to 

the CF card in the other CF card slot to record.

- If both “CF A” and “CF B” appear in the message: CF card A and CF card B are full. Delete some clips (

A

134) to free 

some space or replace a CF card.

CF A/CF B Media is almost full

- The amount of available space on CF card A and CF card B combined is low. Replace the CF card that is not selected.

CF A/CF B Media is not supported

- CF cards that are less than 512 MB or not UDMA-compatible cannot be used with the camera. Use a recommended 

CF card (

A

43).

CF A/CF B Number of clips already at maximum

- The CF card selected for recording already contains the maximum number of clips (999 clips). Replace the CF card or 

use the CF card in the other CF card slot.

- Because both CF cards reached the maximum number of clips, double slot recording is not available.

• During double slot recording, both “CF A” and “CF B” will appear in the message.

CF A/CF B Operation canceled.

- The file control information is corrupted or there was an encoder error. Turn off the camera and back on again. Then, 

remove the CF card being used and reinsert it. Alternatively, replace the CF card. If this does not solve the problem, 
consult a Canon Service Center.
• Corrupted file control information cannot be recovered. CF cards or clips with corrupt file control information cannot 

be read by the supplied Canon XF Utility or plugins.

CF A/CF B Reached the recording limit for one clip. Recording was stopped.

- When recording a single clip for an extended period of time, the clip will be split into smaller video files every 2 GB (or 

1 GB when recording in slow motion). This message will appear when the number of smaller video files reaches 99.

CF A/CF B Using a card that supports UDMA mode 4 or higher is recommended

- The CF card’s UDMA mode is lower than UDMA4. We recommend using a CF card that with a UDMA mode of at least 

UDMA4.

CF A

J

CF B / CF B

J

CF A Switched

- This message appears when you use the SLOT SELECT button to switch the CF card slot in use or recording 

continued from one CF card to the other.

CF A

J

CF B / CF B

J

CF A Will switch in a moment

- The CF card is almost full so recording will continue on the other CF card in approximately 1 minute.

COP

Y

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
Оглавление инструкции

Document Outline