109
Special Recording Modes
3 Press the START/STOP button to begin recording.
• The tally lamp illuminates.
• [S&F] changes to [
Ü
S&F] while recording.
4 Press the START/STOP button again to stop recording.
• A clip is recorded at the set frame rate.
• [S&F STBY
`
] (during 4K and 2K modes) or [S&F STBY] (during MXF mode) appears at the top of the
screen.
• The tally lamp goes out.
Setting the Shooting Frame Rate from the Shooting Screen
If you set an assignable button to [S&F Frame Rate], you can conveniently set the shooting frame rate from the
shooting screen without having to go through the menus.
1 Set an assignable button to [S&F Frame Rate] (
A
2 Press the assignable button.
• The shooting frame rate will be highlighted in orange.
3 Push the joystick up/down or turn the SELECT dial to select the desired frame rate.
4 Press SET.
• The display of the shooting frame rate will return to normal.
NOTES
• You can use only one special recording mode at a time. In addition, slow & fast motion mode cannot be used
with double slot recording.
• While recording, you cannot change the shooting frame rate.
• For lower shooting frame rates, it may take approximately 1 second to stop recording.
• During special recording mode, the time code signal will not be output from the MON. terminals, TIME CODE
terminal or HD/SD SDI terminal. During 4K and 2K modes, the time code signal will be output from the 3G-SDI
terminals.
• Slow & fast motion mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the video configuration.
• When the bit rate in the [
4K/2K/MXF Setup]
>
[MXF]
>
[Bit Rate/Resolution] setting is set to [50 Mbps
1920x1080] or [50 Mbps 1280x720], relay recording is not available during slow motion recording.
• During 4K and 2K modes, the running mode of the time code (
A
84) is set to [Free Run] and cannot be
changed. During MXF mode, the running mode is set to [Regen.]. The time code advances while video is
recorded. If the running mode of the time code is set to [Free Run] or the time code is input from an external
source, the running mode will switch to [Rec Run] during special recording mode. When special recording
mode is deactivated, the running mode will return to its previous setting.
Shooting frame rate
Playback frame rate
COP
Y
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
