![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-115.png)
Reference ID 40-55
- 115 -
User guide
Configuration of the built-in LAN adaptor
The network wizard was called via the network ac-
cess setting
On, wired only
(see page 114).
IP configuration
34
Select type of
IP configuration
.
automatic:
Automatic configuration of the IP
address via DHCP server or via multiple
protocols according to UPnP specifica-
tion (including DHCP).
OK
proceed to network status (see below).
manual:
Enter your fixed static IP addresses
manually (see below).
OK
proceed to
Manual IP configuration
.
Manual IP configuration
If
manual
has been selected under
IP configuration
:
56
Enter IP, Subnet mask, Gateway and DNS server
addresses in succession with the numerical keys
on the remote control.
8
proceed to
network status
.
Network status
You see the current network status again.
BACK:
End of wizard.
.
...
IP
address
192.168.000.123
Subnet
mask
255.255.255.000
Gateway
192.168.000.100
DNS
server
1
192.168.000.010
DNS
server
2
192.168.001.010
Proceed with Back with
Netzworking
Manual
IP
configuration
Manual
IP
configuration
Please specify the static IP address of the network adapter.
Configuration of the built-in WLAN bridge adaptor
The network wizard was called via the network
access setting
On, wireless only
or
Wireless +
bridge function
(see page 114).
Search for Access points
The TV set now searches for wireless routers.
BACK:
Stop search.
Access point selection
After the end of the search:
56
Select required access point from the options
found.
OK
Proceed to entry of WLAN password.
No access point found
If the desired access point is not found:
3465
Mark
Search again
,
OK
repeat search for wireless routers.
Or:
3465
Mark
Enter access point manually
,
OK
enter manually the SSID of the desired access
point, e.g., when the SSID of the access point is
not transferred. For the procedure see page 17.
OK
Proceed to entry of WLAN password.
WLAN password (WPA password / WEP password / WEP index)
If your wireless network is not encrypted: Proceed to
IP configuration
.
Enter WLAN password (for procedure see page 17).
In case of an unknown WLAN key, contact your
network administrator.
For encryption types supported, see page 143.
For WEP encryption
34
Select the
WEP index
,
OK
proceed to
IP configuration
.
IP configuration
34
Select type of
IP configuration
.
For the further workflow of the network wizard
see left column under IP configuration.
Network status
At the end of the network wizard you see your current
network status again.
BACK:
End of wizard.
n
System settings
Multimedia / Network