Reference ID 40-55
- 120 -
User guide
Adjusting the speaker system
Sound playback via ... – Speaker system
Enter here that you want to hear the TV sound over a speaker system. If
you connect active speakers, please use the setting
Speaker system
.
For information on navigation within the wizard refer to
How to connect a speaker system to the TV set is described on
page 130.
When setting up the speaker system for the first time, the configu-
ration starts with the step
Connect front speakers
(see below).
Speaker system was selected in the Sound components wizard
(see page 119).
If you want to set up or change a speaker system:
34
Select
Configuration/modification.
If nothing has been set yet, the factory settings
or otherwise the last set values are displayed.
Conclude this step (for navigation refer to page 16).
65
Select
Complete
.
Conclude this step (for navigation see page 16) and
continue to connect and set the
front speakers
.
34
Select
External speakers
or
TV speakers
.
6
For
External speaker
go to the frequency bar
below and
34
set the
lower limit frequency
of the external
front speakers in steps of 10 Hz.
0dB
0dB
100Hz
90Hz
100Hz
100Hz
100Hz
0dB
0dB
0dB
4,0m
3,0m
4,0m
2,0m
2,0m
TV
TV
3,9m
TV
0dB
...
Sound com-
ponents
Speaker system
Speaker system
Please specify whether you want to change the illustrated setting of your
speaker system or whether all existing settings are to be reset to the values of the
delivery state.
Note: The newly selected parameter must be confirmed with the button.
Back with
Components
Distances
Level
Configuration/modification
Reset to factory settings
OK
Configuration/
modification
Configuration/
modification
...
Sound com-
ponents
Configuration/modification of speaker system
Configuration/modification of speaker system
Please specify here whether you wish to fully set up a speaker system for the first
time or wish to completely modify an existing one or whether you wish to restrict
yourself to changing the speaker connections, changing the distances of the
speakers from the listening position or altering the individual volume levels.
Note: The newly selected parameter must be confirmed with the button.
Cancel with
Back with
Complete
Connections only
Distances only
Levels only
OK
100Hz
100Hz
100Hz
100Hz
100Hz
...
Sound com-
ponents
Connect front speakers
Please specify here whether you wish to use the TV
speakers or external front speakers as front
speakers. In the latter case, their lower limit
frequency must be entered in Hz (see instruction
manual and technical data of the speakers).
Proceed with
Back with
TV speakers
External speakers
20
Hz
100 Hz
200
Hz
Connect
front
speakers
Select the start value of the frequency response of
the speakers for the correct setting (e.g., 50Hz for
t h e s p e c i f i ca t i o n “ Fre q u e n c y re s p o n s e
50-20,000Hz”). See the technical data of the speak-
ers for the value.
You can replace the external front speakers by the
TV speakers if necessary. In this case,
TV speakers
.
Then, the TV speakers transmit the sound of the
front speakers.
Conclude this step (for navigation see page 16)
surround speakers
34
Select
yes
or
no
for the external surround speakers.
In case, external speakers were chosen as surround
speakers:
6
Select frequency bar
34
set the
lower limit frequency
of the surround
speakers in 10 Hz steps.
Select the start value of the frequency response of
the speakers for the correct setting.
Conclude this step (for navigation see page 16)
centre speaker
34
Select whether the
TV speakers
or an
External
speaker
is to reproduce the centre sound or
no
if no centre speaker is connected.
If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
6
For
External speaker
go to the frequency bar
below and
34
set the
Lower Limit Frequency
of the external
front speakers in steps of 10 Hz.
Select the start value of the frequency response of
the speakers for the correct setting.
Conclude this step (for navigation see page 16) and
continue to connect the
Subwoofer
.
100Hz
100Hz
100Hz
100Hz
100Hz
...
Sound com-
ponents
Connect surround speakers
Connect surround speakers
Please specify here whether you want to connect
external surround speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
no
yes
20
Hz
100 Hz
200
Hz
Proceed with
Back with
Connect
surround
speakers
...
Sound com-
ponents
Connect centre speaker
Connect centre speaker
Please specify here whether you wish to use a
centre speaker. This function can be fulfilled by the
TV speakers, if they are not used as front speakers,
or by an external speaker. In the latter case, its
lower limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
no
TV speakers
External speaker
Proceed with
Back with
100Hz
90Hz
100Hz
100Hz
100Hz
TV
Connect
centre
speaker
n
System settings
Connections
continued on the next page