Reference ID 40-55

- 27 -

User guide

 Setting options for the satellite system  
(DiSEqC one cable communal system):

34

 Select 

One channel

 or 

Two channels

.

     Here you specify if you use one or two transmis-

sion channels in your one cable communal 
system. 

     In case of two channels - as far as they are avail-

able in your system - different stations can be 
simultaneously viewed on the main picture and 
on PIP.

     You get more information on your system from 

your dealer.

Conclude this step (for navigation refer to page 16).

5634 

Select DiSEqC single cable communal instal-
lation.

OK

  Adopt settings.

Conclude this step (for navigation refer to page 16).

5634

 Select satellites from list,

Conclude this step (for navigation refer to page 16)

Number of 

system 

channel used

Number of system channel used

One channel 

      Two channels

Do you wish to use one or two transmission channels in your single cable communal

installation? With two channels - provided they are available to you from the installation - it

is possible to watch different stations at the same time in the main screen and in the PIP.

Retour avec                  Continuer avec  

Select DiSEqC single cable communal installation

Please enter here which DiSEqC single cable system you are using. The following setting 

parameters of your system are then adapted accordingly.

User defined 

DELTA 

SUM-918       

KATHREIN 

EXR-501

DELTA 

SUM-514  

DELTA 

SUM-928       

KATHREIN 

EXR-551

DELTA 

SUM-516  

DELTA 

MSU-50x       

KATHREIN 

EXR-552

DELTA SUM-518                DELTA MSU-90x/170x           KATHREIN EXR-154

Back with                  Proceed with

DiSEqC  

one cable  

communal 
installation

Select satellites

Please specify here which satellite you receive.

None

        ASTRA1 

19,2°E    

Intelsat10-02 1°W

Türksat  42°E  

Eutelsat W2 16°E       Atlantic Bird3 5°W

Hellas 

Sat2 

39°E  

    Hot 

Bird 

13°E     Telecom2C 

5°W

Eutelsat 

W4 

36°E 

    Eurobird 

9A 

9°E    Nilesat 

7°W

Eurobird1 

28,5°E 

    Eutelsat 

W3A 

7°E 

   Atlantic 

Bird2 

8°W

ASTRA2 

28,2°E  

    Sirius2/3 

5°E 

     Telecom2D 

8°E

ASTRA3 

23,5°E  

    Thor2/3 

0,8°W 

    Atlantic 

Bird1 

12,5°W

Back with                  Proceed with

Satellite 

selection

.

5634

 Set LNB frequencies.

 Normally, you do not need to change the 
values unless the LNC (LNB) of your satellite 
system uses a different oscillator frequency 
(important for the frequency display).

OK

  Adopt settings.

Conclude this step (for navigation refer to page 16).

5634

  Select and adjust settings for the DiSEqC 

single cable communal installation.

OK

  Adopt settings.

Transmission 

channel 

 Select the desired transmission channel. 

Transmission  

frequency

Select the corresponding transmission frequency.

PIN protection If your system is designed for it, it is possible to pro-

tect your used transmission data from use by other 
subscribers with a PIN.

Define/

change PIN

Here you can determine and change the PIN for 
PIN protection. Only possible, when 

yes

 has been 

selected for PIN protection.

Conclude this step (for navigation refer to page 16).

(Proceed with

 Setting options for DVB-S reception 

(continued) 

on page

29).

Please select the LNB frequencies for both High and Low Bands.

Note: The newly selected parameter in each case must be confirmed with the       button.

LNB frequencies

ASTRA1 19,2°E Low Band           

5150 MHz

     9750 MHz     

10000 MHz

10200 MHz

ASTRA1 19,2°E High Band

10600 MHz     

10750 MHz

11000 MHz

11250 MHz

OK

Back with                  Proceed with

LNB 

frequencies

Please log in to your DiSEqC single-cable system which is connected to the ANT SAT antenna 

input and state the desired transmission channel and the corresponding transmission 

frequency. If your antenna system is designed for it, it is possible to protect your transmission 

data from being used by other users with a PIN.

Note: The newly selected parameter in each case must be confirmed with the       button.

Transmission channel       1   

2    3    4    5    6    7    8

Transmission frequency

     1284 MHz      

1400 MHz     1516 MHz      163

PIN protection

            Ja    

Nein

Define/change PIN

         123

Manual registration (for socket ANT SAT)

OK

Back with                  Proceed with

Manual 

registration 

(for socket 

ANT SAT)

n

Initial installation