![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-139.png)
Reference ID 40-55
- 139 -
User guide
Problem
Possible cause
Remedy / Instructions
The TV set switches off automatically.
The
automatic shutdown
switches off the
TV set to save energy after 4 hours of inacti-
vity as soon as at least one signal input group
is set up in the energy efficient mode
Home
Mode
.
Using automatic shutdown is recommended
for the purposes of energy saving and safety.
All menus are displayed in the
wrong langu-
age
.
The menu language was set incorrectly.
Set the menu language:
Press
HOME
key. Call last menu item
(bot-
tom left). Mark the fourth item from above in the
following list and move to next column to the
right. Call first list item with
OK
. Select the lan-
guage and confirm it with
OK
.
General problems when connecting
external
devices
via an
AV input
.
a) The
AV standard
is set incorrectly.
b) The
Signal type
is set incorrectly.
a) Set the correct standard (see page 123).
b) Set the correct signal type (see page
123).
If
AV standard
or
Signal type
is set to
“
Automatic
” then this can lead to false
detections with non-standard signals. In this
case standard and signal must be set accor-
ding to the information in the operating
manual of the external device.
With
Teletext
various
characters
are displa-
yed incorrectly.
The wrong character set has been set in the
System settings
.
Set the correct character set:
System set-
tings
→
Control
→
more ...
→
Standard
Teletext
→
Character set
→
Standard
or
select the appropriate character set.
Errors occurred when running a CA module.
Switch the TV set off. Remove the CA-module
from the TV set. Wait a few seconds. Reinsert
the CA module. Switch the TV set on again.
No sound
via the external digital
audio am-
plifier
.
a) The external digital audio amplifier does
not support the selected sound format
(Dolby Digital, dts, MPEG).
b) TV set and external digital audio amplifier
are not connected with each other.
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations switch
Language/Sound
b) Connect
SPDIF OUT
from the TV set to a
digital
input of the external digital audio
amplifier and select the appropriate input
to this.
A programmed
recording
was not made.
The provider deleted the programme from
the EPG data, for example due to a pro-
gramme change.
The station from which the recording was
made does not support
automatic time
control
(
Accurate Recording
).
Only the broadcasting organisations are re-
sponsible for transmitting data for the
auto-
matic time control
. The availability of the
appropriate data cannot be guaranteed.
There is no start or end of a programmed
recording although the
automatic time
control
(
Accurate Recording
) was used.
The transmission time of the program was
delayed and the channel from which the recor-
ding was made has not updated the data.
Only the broadcasting organisations are re-
sponsible for transmitting data for the
auto-
matic time control
. The availability of the
appropriate data cannot be guaranteed.
No IP address will be issued to your TV set in
spite of
automatic
IP configuration.
No DHCP server is working on your network. Set up a DHCP server.
Assign the IP addresses for the TV set
manu-
ally
.
n
Troubleshooting