![background image](/i/oki/154912/oki-c711dm/h/oki-c711dm-111.png)
- 111 -
6. Syncing with Active Directory User Information
6
Disable Scan to Network PC
Prohibits Scan to network PC using panel
operations.
Disable Scan to USB Memory
Prohibits Scan to USB memory using panel
operations.
Disable Fax Sending
Fax sending using panel operations is prohibited.
Fax sending that uses the fax driver is also
cancelled.
Disable Scan to Internet Fax
Prohibits scan to internet fax using panel
operations.
Disable Scan to Fax Server
Prohibits scan to fax server using panel
operations.
Notifies total result by e-mail
Notifies the total amount used every month by
e-mail.
Notifies by e-mail when Limit Values was
exceeded
A mail notification is sent when the print quantity
exceeds the limit value and printing is no longer
possible, and when the limit value is reset and
printing is made possible again.
Do not process Limit Value as a group
Limit values can be set individually for printer
users that belong to a printer group, and users
that belong to a user group. When [Do not
process Limit Value as a group] is unchecked, if
the total amount used by users that belong to the
group exceeds the specified limit value, printing
of all users that belong to the group is cancelled.
When [Do not process Limit Value as a group] is
checked, if the total amount used by users that
belong to the group exceeds the specified limit
value, printing of the users whose print total
exceeds the limit value is cancelled.
2
Set the limit values in the [Limit Values]
tab.
When each of the limit values is
exceeded, printing is cancelled until the
valid period set in step
9
.
Note!
The limit value settings are enabled
from the point at which the server
software obtains the log when the limit
value has been exceeded. Printing can
still be performed when the limit value
is exceeded until the server software
receives the log.
Printed Sheets
Set the number of sheets that can be printed.
Fees
Set the upper limit of the fee charges.
Staple
When the optional finisher is installed, set the
number of times that the stapler can be used.
If the limit value was set, proceed to step
3
.
If the limit value was not set, proceed to
step
4
.