![background image](/i/oki/154912/oki-c711dm/h/oki-c711dm-027.png)
- 27 -
2
2. Setting up the server software
3
Set the printer to acquire the log, and
click [Finish].
Printer Name
Set the name of the printer to be displayed in the
server software.
Printer Group
Select the group that the printer belongs to.
Acquire Logs
Set the schedule by which the log is acquired.
Note!
Always set a time when the computer in
which the server software is set up and
printer power are both switched ON.
The log is not acquired if the power is
not ON.
Interval
Set the interval when the log is acquired over
a fixed time. The maximum interval time that
can be set is 24 hours. The default setting is
set as an optimized value detected from the
state of the added printer. If the interval is
set to a time that is longer than the default
settings, some of the logs may not be acquired.
Time
Set the specific time. Click [Change Time], and
add the time to the [Change Time To Acquire
Logs] window. Up to 5 acquisition times can be
added. After adding, click [OK].
Fees
Set the fee definition pattern when assigning
printing costs to users.
Click [Define fees] to add definitions.
For details on the fee charge definitions, see
"Creating fee charge definitions" (page 84).
Memo
The initial settings definition shows
a rough guide to the running costs
calculated from the standard prices of
various consumables and the number of
prints over the lifetime for each model.
Operation at Log Full
Set the process when the printer log buffer is full.
• Delete old logs
The oldest log is deleted, and the new log is
received.
• Cancel the job
All subsequent print jobs are cancelled.
• Do not acquire the log
The log is not obtained for subsequent print
jobs.