![background image](/i/oki/154912/oki-c711dm/h/oki-c711dm-231.png)
12. Operation and Management
12
- 231 -
Operations when the log is
full
The processes when the printer log buffer
is full before the log is acquired by the
server software can be set.
1
Check that the printer power is ON.
2
Start the server software.
3
Double-click [Printer] in the selection
window. The registered printer list is
displayed in the list view of the details
window.
4
Select the printer, and then select the
[Printer] menu > [Properties].
Memo
Multiple printers can be selected.
5
In the [Option] tab, change [Operation at
Log Full].
Delete old logs
The oldest log is deleted, and the new log is
received.
Cancel the job
All subsequent print jobs are cancelled.
Do not acquire the log
The log is not obtained for subsequent print jobs.
6
Click [OK].
Updating setting information
when an option is installed
(Only Enterprise edition)
When an option is added to a printer,
information can be acquired from the
printer, and the setting information
updated. When an SD card is installed
in the printer for receiving the IC card
compatibility table after the printer
is registered in the server software,
it is necessary to update the setting
information in the server software.
1
Check that the printer power is ON.
2
Start the server software.
3
Double-click [Printer] in the selection
window. The registered printer list is
displayed in the details window.
4
Select the printer, and then select the
[Printer] menu > [Properties].
Memo
Multiple printers can be selected.