![background image](/i/oki/154912/oki-c711dm/h/oki-c711dm-192.png)
9. Operating the Log
9
- 192 -
Immediately acquiring the
log
The log can be acquired immediately
irrespective of the log acquisition schedule.
1
Check that the printer power is ON.
2
Start the server software.
3
Double-click [Printer] in the selection
window. The registered printer list is
displayed in the list view of the details
window.
4
Select the printer, and then select the
[Printer] menu > [Acquire a Log].
Memo
Multiple printers can be selected.
5
Click [Close] in the acquisition results
window.
Memo
When the log is being displayed, select
the [Log] menu > [Refresh Display] to
refresh the log display.
Notifying the printer of the
time
As some printer models do not have a
built-in clock, the server software notifies
the printer of the time every hour when
the log is acquired. Therefore, when the
printer power is turned OFF/ON, the time
information cannot be logged until the
printer is notified of the time. In this case,
the time can be notified manually to the
printer.
The time notified to the printer is the
time in the computer in which the server
software is set up.
1
Check that the printer power is ON.
2
Start the server software.
3
Double-click [Printer] in the selection
window. The registered printer list is
displayed in the list view of the details
window.
4
Select the printer, and then select the
[Printer] menu > [Setting the Time].
5
Click [OK] in the completed window.