Installing network connected machine’s driver
Windows
You can set up the machine driver, follow the steps below.
This is recommended for most users. All components necessary for machine operations will be installed.
1.
Make sure that the machine is connected to the network and powered on.
2.
Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window appear.
If the installation window does not appear, click
Start
and then
Run
. Type X:\
Setup.exe
, replacing “X”
with the letter which represents your drive. Click
OK
.
If you use Windows Vista, Windows 7 and Windows 2008 Server R2 click
Start
>
All programs
>
Accessories
>
Run
.
Type X:\
Setup.exe
replacing “X” with the letter which represents your drive and click
OK
.
If the
AutoPlay
window appears in Windows Vista, Windows 7 and Windows 2008 Server R2, click
Run
Setup.exe
in
Install or run program
field, and click
Continue
or
Yes
in the
User Account Control
windows.
3.
Click
Next
.
If necessary, select a language from the drop-down list.
4.
Select
Typical installation for a network printer
. Then, click
Next
.
The Custom Installation allows you to select the machine’s connection and choose individual component to
install. Follow the guide on the window.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
