![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-102.png)
Reference ID 40-55
- 102 -
User guide
Software update via USB storage device
To do this, plug the USB stick with the downloaded software (see page
101) into a free USB port of the TV set (see connections page 11).
Calling Software update
HOME:
Call
Home
view.
3456
Mark
System settings
,
OK
call System settings.
65
Mark
Control
,
4
go to next column.
65
Mark
Software
,
4
go to next column.
65
Mark
Software update
,
4
go to next column.
65
Mark
Via USB
,
4
call Software update.
The version of the software package that is
currently installed will be displayed.
8
Proceed
.
The TV set searches for a new software package
on the USB stick.
If a new software version is available after the search,
an on-screen message appears (see right hand
column).
If several different software packages are found on the
USB stick, the latest software package is always used.
If no new software package was found in the search:
BACK:
End of wizard
.
...
...
Via USB
Current software: V1.3.0.0
To load a new piece of software, you first need to search
for said software on a USB storage device that is
connected (e.g. USB stick). Press the key to start the
search.
Proceed with
Cancel with
New software package found
8
Proceed
starts loading of the new software.
Or:
BACK: End of wizard
.
The update will then
not
be carried out.
Load new software package
The software is loaded in several steps. The total loading
and programming process can take up to approx. 50
minutes in total.
Please do
not
switch off your TV set with the mains
switch during the entire loading and programming
process.
You will be informed at the end of the update.
To make your TV set completely ready for use again,
please turn it off and on again at the mains.
...
...
Via USB
SOFTWARE-UPDATE WIZARD - Current software
SOFTWARE-UPDATE WIZARD - Current software
Proceed with
Proceed with
Cancel with
Cancel with
Current software: 1.9.6.0
To load a new piece of software, you first need to search
for said software on a USB storage device that is
connected (e.g. USB stick). Press the key to start
the search.
Current software: 1.9.6.0
To load a new piece of software, you first need to search
for said software on a USB storage device that is
connected (e.g. USB stick). Press the key to start
the search.
60%
...
...
Via USB
Note: The loading and programming process can take up to
approx. 50 minutes in total. Please do not switch off your
TV set at the mains during this time.
Note: The loading and programming process can take up to
approx. 50 minutes in total. Please do not switch off your
TV set at the mains during this time.
Updating software
Updating software
The "V5.60.0.0 F2" is being programmed, please wait ...