Reference ID 40-55
- 128 -
User guide
Connecting a DVD recorder to the TV set
A
DVD recorder
has been selected in the
System settings
→
Con-
nections
→
AV connecting settings
→
Device at connection
AV
(see also page 127).
Switch off all devices before connecting them.
Connect the Scart output of the DVD player to the TV set’s
AV
socket
using the Scart adaptor
(1
. Use a fully equipped Scart cable (available
from your dealer) for this.
Plug the adaptor plug into the
AV
socket of the TV set so that the arrow
on the plug is visible.
If you want to receive and record analogue stations with the receiver
(tuner) built into the recorder, the recorder must be looped into the
aerial cable.
Connect the DVD recorder as shown in the connection example below.
Playback from AV device
Call
AV selection
.
56
Select
AV
,
OK
switch over.
Start playback on the connected device.
ANT IN
ANT OUT
AV
AV
R
TV
DVD recorder
TV set
Connection example of a DVD recorder
AVS
AVS
PC IN
PC IN
VIDEO
VIDEO
AV
AV
HDMI 4
HDMI 4
AV selection
AV selection
Select with
Select with
OK
Devices on AV
The AV input
AVS
(see page 11) offers the possibility of connect-
ing, e.g., a digital camera, a camcorder or a PC via different adaptors.
The adaptors required in the following are part of an adaptor set. The
adaptor set is available as an accessory from your Loewe dealer (see
page 158).
The AV inputs
AVS
and
PC IN
available in the AV selection both
refer to the
AVS
socket at the side of the TV set.
AVS
is always to
be chosen in the AV selection if the Scart adaptor or the S-video
adaptor are used. Select
PC IN
in the AV selection when you con-
nect a device via the VGA adaptor.
Connecting Camcorder/camera
Switch off all devices before connecting them.
Connect the video output of the camcorder to the TV set’s
AVS
socket using the S-video adaptor
(1
. Use the AV cable enclosed with
the camcorder for this.
Depending on the type of plug, an additional cable is required for the
audio connection.
Plug the adaptor plug into the
AVS
socket of the TV set so that the ar-
row on the plug is visible.
If your camcorder has an HDMI output, you can also connect the device
to the HDMI sockets
HDMI3
or
HDMI4
on the side of the TV set (see
Connections
page 11 or
Devices to the HDMI connections
page 126).
Playback from AV device
Call
AV selection
.
56
Select
AVS
,
OK
switch over.
Start playback on the connected device.
Connection example of a camcorder
AVS
Camcorder
TV set
AVS
AVS
PC IN
VIDEO
AV
AV selection
AV selection
Select with
Select with
OK
n
External devices
(1
Adaptor set is available as an accessory (see page 145).