![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-130.png)
Reference ID 40-55
- 130 -
User guide
Connecting the Loewe speaker system
Set-up
The arrangement of speakers and TV set can look like the illustration
below:
The front and surround speakers should be installed symmetrically
to the TV set and to your sitting position.
You can position the subwoofer anywhere on the floor. We recommend
placing it in front asymmetrically next to the TV set.
If you use another speaker than the Stereospeaker I 40 / 46 / 55 to be
the centre speaker, place it in the middle below the TV set.
For the manual settings in the sound components wizard enter the
distances of the centre speaker, and the front and surround speak-
ers to your sitting position. This guarantees a natural spatial image
of the sound.
Example for placing the Loewe sound system
Subwoofer
Front
left
Front
right
Surround
left
Surround
right
Stereospeaker I 40/46/55
as centre speaker
Connection
Switch off all devices before connecting them.
The subwoofer is connected to the TV set via the
DIGITAL AUDIO
LINK
interface. Plug a network cable (Category 5e or higher) to the
DIGITAL AUDIO LINK
port
of the TV set. Connect the Ethernet cable
to the RJ45 socket of the
Digital Audiolink / Audiolink
converter
available as accessory. Connect the converter to the
AUDIO LINK
socket of the Subwoofer.
Connecting the speakers to the subwoofer
further information on the wiring of the speakers you find the the
instruction manual of the speaker system.
Sound reproduction via the speaker system
The sound reproduction by the speaker system can be adjusted in the
sound components wizard.
Further information on settings for the speaker system you find start-
ing from page 120.
Connection of the Loewe speaker system to the TV set
TV set
Subwoofer
Converter
Digital Audiolink / Audiolink
Ethernet cable
(Cat. 5e or higher)
n
External devices