Reference ID 40-55
- 134 -
User guide
Teaching the remote control
By means of key code
18
(Set-Top Box data base) your remote control
Assist may be taught for your Set-Top Box (e.g., decoder, external cable
tuner). Thus, you spare yourself the use of several remote controls.
For the use of 2-digit key codes see page 133.
The following options are available for teach-in:
- Entering a 3-digit code number
- Set-Top Box read-out
- Teaching individual keys
- Delete learned codes
In the following, the
STB
key is dealt with as an example since
device code 18 is preset for this key ex-works. Code 18 may also
be assigned to the
AUDIO
and
RADIO
keys (see page 133); the
following description applies accordingly.
Entering a 3-digit code number
The
STB
key can be programmed directly by means of a device-
dependent 3-digit code. You find a list of these codes starting from
page 159.
Keep the
STB
and
OK
keys depressed for five seconds.
The LED above the
STB
key flashes twice.
Enter the 3-digit code from the list. The LED above the
STB
key lights up for 1 second.
OK
end the programming mode. After a successful
programming the LED flashes twice.
When entering a wrong code number, the LED lights
up for 2 seconds. Do this programming once again.
Read-out of programmed Set-Top Box
The code of the currently programmed device on the
STB
key can be
indicated by the remote control.
Keep the
STB
and
OK
keys depressed for five seconds.
The LED above the
STB
key flashes twice.
Press
INFO
key.
The LED above the
STB
key shows the programmed
code by flashing. The figure "0" will be indicated by
flashing 5 times.
Teaching individual keys
All keys (except the
TV
,
STB
,
VIDEO
and
AUDIO
device keys as well
as the
V+/-
keys and
) can be taught for the operation of units
which are not contained in the integrated data base. The functions of
the selected button are then completely or partially overwritten with
the new codes.
Place the TV remote control and the remote control to be replaced
in such a way that the infrared windows face each other at a distance
of 1-5 cm (see sketch).
Keep the
STB
and the
red key
simultaneously
depressed for five seconds. The LED above the
STB
key lights up permanently.
Press key to be taught on the TV remote control.
The LED above the
STB
key flashes.
On the original remote control press the button
which is to be taught.
The LED above the selected
STB
key flashes twice.
If the code is not correctly recognised, the LED above
the
STB
key flashes ten times. Then repeat your entry
on the original remote control. If necessary correct the
allocation of the two remote controls. Continue with
the other buttons as described above.
To end the teaching mode, press the
STB
key again.
After 10 seconds without an entry the teaching mode
is automatically terminated.
It is possible that not all remote control codes can
be taught.
You can make notes of the functions you have
assigned to the keys on page 161.
1-5 cm
n
Teaching the remote control