![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-022.png)
Reference ID 40-55
- 22 -
User guide
Setting options for DVB-T reception:
If you have not selected DVB-T antenna in the list of available anten-
nas: Proceed to Setting options for
DVB-C reception
on page 23.
If a CA module is plugged in during Initial installation and if
Stations
in the special station list
was selected in
Extent of station
search
(see page 21), the routine continues with the step
Sup-
ply voltage
(see right column).
If several networks are available via DVB-T, you can
decide which network you want to receive your chan-
nels from.
56
Select network,
Conclude this step (for navigation refer to page 16).
5634
Select and adapt settings for DVB-T reception.
OK
Adopt settings.
Network
selection
Please state from which network you wish to receive your station.
Freeview
other network
Network selection
Back with Proceed with
Please specify whether you want to search for scrambled stations too.
Note: Scrambled stations can only be received with an integrated CA module and additional
card.
Note: The newly selected parameter in each case must be confirmed with the button.
DVB-T settings
OK
Search method
Accept Logical Channel Number
Scrambled stations
no
yes
Channel search
Frequency search
no
yes
Back with Proceed with
Settings
Scrambled
stations
You can state whether coded stations are to be
searched for in the search/update.
Select
yes
to
save all found scrambled stations. However, these
stations can only be received in connection with a CA
module and the appropriate Smart Card.
Handling of
the CA module is described on page 81.
Search
method
If you want to run the station search independently
of the channel grid, select
Frequency search
for
the search method.
Accept
Logical
Channel
Number
In various countries, digital stations (DVB-T) are
transmitted with a preset channel number per
station, known as Logical Channel Numbers (LCN).
If you select
yes
here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The stations in the
station list can no longer be shifted (see
Conclude this step (for navigation refer to page 16).
34
Select supply voltage
no / yes
.
If you use a DVB-T antenna that requires a supply
voltage (active antenna) and which is not already
supplied via a power adaptor, then select
yes (5V)
for the antenna’s power supply.
How to align your DVB-T antenna is described on
page 123.
Conclude this step (for navigation refer to page 16).
Please state here whether your DVB-T antenna needs a supply voltage. Antennas with an
integrated amplifier need a supply voltage on the antenna line.
Supply voltage DVB-T antenna
no (0V)
yes (5V)
Back with Proceed with
Supply
voltage
n
Initial installation