![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-023.png)
Reference ID 40-55
- 23 -
User guide
Scrambled
stations
You can state whether coded stations are to be
searched for in the search/update.
Select
yes
to
save all found scrambled stations. However, these
stations can only be received in connection with a CA
module and the appropriate Smart Card.
Handling of
the CA module is described on page 81.
Search
method
If you select
Frequency search
here, a search is
performed for all receivable stations. With
Network
search
, only the stations which the networks supply
are searched - either for all receivable networks
or only for the particular network specified under
Network ID
.
Start
frequency
The DVB stations are only searched for in the fre-
quency range above the start frequency.
Network ID If you select
none
here, DVB signals of all current
transmitter networks are searched automatically
(recommended for most cable networks).
If, on the other hand, you specify a certain network ID
(necessary in the cable networks of some countries),
only DVB signals of this broadcasting network are
searched for automatically.
Your cable provider has the information you need.
Accept
Logical
Channel
Number
In various countries, digital stations (DVB-C) are
transmitted with a preset channel number per
station, known as Logical Channel Numbers (LCN).
If you select
yes
here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The stations in the
station list can no longer be shifted (see
Conclude this step (for navigation refer to page 16).
Setting options for DVB-C reception:
If you have not selected DVB-C antenna in the list of available antennas:
Proceed to
Setting options for DVB-S reception
(see page 24).
If a CA module is plugged in during Initial installation and if
Stations
in the special station list
was selected in
Extent of station
search
(see page 21), the routine continues with the step
Set-
ting options for DVB-S reception
(see page 24).
If several networks are available via DVB-C, you can
decide which network you want to receive your chan-
nels from. The normal DVB-C settings are derived from
the selection of the location or network and do not
need to be changed. Exactly which of the following
settings are present is dependent on which network is
selected.
56
Select network.
Conclude this step (for navigation refer to page 16).
5634
Select and adapt settings for DVB-C recep-
tion.
OK
Adopt settings.
Network
selection
Please state from which network you wish to receive your station.
Unitymedia
other network
Network selection
Back with Proceed with
Please specify whether you want to search for scrambled stations too.
Note: Scrambled stations can only be received with an integrated CA module and additional
card.
Note: The newly selected parameter in each case must be confirmed with the button.
DVB-C settings
OK
Scrambled stations
Accept Logical Channel Number
no yes
Network
search
Frequency search
044.00
MHz
none
00000
no
yes
Back with Proceed with
Settings
n
Initial installation