![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-027.png)
Reference ID 40-55
- 27 -
User guide
Setting options for the satellite system
(DiSEqC one cable communal system):
34
Select
One channel
or
Two channels
.
Here you specify if you use one or two transmis-
sion channels in your one cable communal
system.
In case of two channels - as far as they are avail-
able in your system - different stations can be
simultaneously viewed on the main picture and
on PIP.
You get more information on your system from
your dealer.
Conclude this step (for navigation refer to page 16).
5634
Select DiSEqC single cable communal instal-
lation.
OK
Adopt settings.
Conclude this step (for navigation refer to page 16).
5634
Select satellites from list,
Conclude this step (for navigation refer to page 16)
Number of
system
channel used
Number of system channel used
One channel
Two channels
Do you wish to use one or two transmission channels in your single cable communal
installation? With two channels - provided they are available to you from the installation - it
is possible to watch different stations at the same time in the main screen and in the PIP.
Retour avec Continuer avec
Select DiSEqC single cable communal installation
Please enter here which DiSEqC single cable system you are using. The following setting
parameters of your system are then adapted accordingly.
User defined
DELTA
SUM-918
KATHREIN
EXR-501
DELTA
SUM-514
DELTA
SUM-928
KATHREIN
EXR-551
DELTA
SUM-516
DELTA
MSU-50x
KATHREIN
EXR-552
DELTA SUM-518 DELTA MSU-90x/170x KATHREIN EXR-154
Back with Proceed with
DiSEqC
one cable
communal
installation
Select satellites
Please specify here which satellite you receive.
None
ASTRA1
19,2°E
Intelsat10-02 1°W
Türksat 42°E
Eutelsat W2 16°E Atlantic Bird3 5°W
Hellas
Sat2
39°E
Hot
Bird
13°E Telecom2C
5°W
Eutelsat
W4
36°E
Eurobird
9A
9°E Nilesat
7°W
Eurobird1
28,5°E
Eutelsat
W3A
7°E
Atlantic
Bird2
8°W
ASTRA2
28,2°E
Sirius2/3
5°E
Telecom2D
8°E
ASTRA3
23,5°E
Thor2/3
0,8°W
Atlantic
Bird1
12,5°W
Back with Proceed with
Satellite
selection
.
5634
Set LNB frequencies.
Normally, you do not need to change the
values unless the LNC (LNB) of your satellite
system uses a different oscillator frequency
(important for the frequency display).
OK
Adopt settings.
Conclude this step (for navigation refer to page 16).
5634
Select and adjust settings for the DiSEqC
single cable communal installation.
OK
Adopt settings.
Transmission
channel
Select the desired transmission channel.
Transmission
frequency
Select the corresponding transmission frequency.
PIN protection If your system is designed for it, it is possible to pro-
tect your used transmission data from use by other
subscribers with a PIN.
Define/
change PIN
Here you can determine and change the PIN for
PIN protection. Only possible, when
yes
has been
selected for PIN protection.
Conclude this step (for navigation refer to page 16).
(Proceed with
Setting options for DVB-S reception
(continued)
on page
Please select the LNB frequencies for both High and Low Bands.
Note: The newly selected parameter in each case must be confirmed with the button.
LNB frequencies
ASTRA1 19,2°E Low Band
5150 MHz
9750 MHz
10000 MHz
10200 MHz
ASTRA1 19,2°E High Band
10600 MHz
10750 MHz
11000 MHz
11250 MHz
OK
Back with Proceed with
LNB
frequencies
Please log in to your DiSEqC single-cable system which is connected to the ANT SAT antenna
input and state the desired transmission channel and the corresponding transmission
frequency. If your antenna system is designed for it, it is possible to protect your transmission
data from being used by other users with a PIN.
Note: The newly selected parameter in each case must be confirmed with the button.
Transmission channel 1
2 3 4 5 6 7 8
Transmission frequency
1284 MHz
1400 MHz 1516 MHz 163
PIN protection
Ja
Nein
Define/change PIN
123
Manual registration (for socket ANT SAT)
OK
Back with Proceed with
Manual
registration
(for socket
ANT SAT)
n
Initial installation