![background image](/i/loewe/153202/loewe-reference-ld-46-reference-id-40-reference-ld-55/h/loewe-reference-ld-46-reference-id-40-reference-ld-55-028.png)
Reference ID 40-55
- 28 -
User guide
Setting options for the satellite system (other communal
installation):
5634
Select satellite.
Conclude this step (for navigation refer to page 16).
5634
Select and adapt settings.
OK
Adopt settings.
LNC
frequency
Normally, you do not need to change the values for
high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
Supply
voltage
If your set is connected to a single-cable system
without external voltage supply, you can connect
the antenna supply (13V or 18V / max. 500mA).
Conclude this step (for navigation refer to page 16).
(Continue with
Setting options for all types of
reception
on page 30).
Türksat 42°E
Eutelsat W2 16°E
Atlantic Bird3 5°W
Hellas Sat2 39°E
Hot
Bird
13°E Telecom2C
5°W
Eutelsat
W4
36°E
Eurobird
9A
9°E Nilesat
7°W
Eurobird1
28,5°E
Eutelsat
W3A
7°E
Atlantic
Bird2
8°W
ASTRA2
28,2°E
Sirius2/3
5°E
Telecom2D
8°E
ASTRA3
23,5°E
Thor2/3
0,8°W
Atlantic
Bird1
12,5°W
ASTRA1 19,2°E
Intelsat10-02 1°W Telestart12
12,5°W
Select satellites
Please specify here which satellite you receive.
Back with Proceed with
Select
single satellite
LNB frequency, supply voltage
ASTRA1 19,2°E low band
9750 MHz
10000 MHz 10200 MHz 10600 MHz
Supply
voltage
off
13V 18V
OK
Please specify the oscillator frequency for your LNB.
If your TV set is connected to a single cable system without an external power supply, you
can connect the antenna supply (13 or 18V/max. 350mA) with „13V“ or „18V“.
Note: The newly selected parameter in each case must be confirmed with the button.
Back with Proceed with
LNB
frequencies
n
Initial installation