Troubleshooting 5-15
OG
L
0 0
LED Eraser Not Set
Set Erase Lamp
E080
The LED eraser is not set.
Contact your authorized Service
Technician.
Lifting Tray Name
The specified tray is moving into the
feed position.
Status message. Wait for the printer to
return to a Ready state.
Loading Fail Network
Status message.
Wait for the printer to return to a Ready
state.
Loading Network
Status message.
Wait for the printer to return to a Ready
state.
Low on Front Staples
Status message.
Have replacement staples available.
Low on Rear Staples
Status message.
Have replacement staples available.
Low Toner - Recovery
Load xx
E09A
In process of supplying the toner.
Wait for the printer to return to a Ready
state.
MBT
Load xx
E090
The wrong paper size is loaded in the
multi-bypass tray.
Load the MBT with the requested
paper size.
Multi Feed Jam HCFx
Remove Paper
E15D
or E15E
Two sheets were fed from the HCF.
Remove the jammed paper.
Multi Feed Jam Tray x
Remove Paper
E15x
Two sheets were fed from the tray. x is
the tray number.
Remove the jammed paper.
Network Load Failed
Network connection error.
Check the Ethernet cable of the NIC.
Out of Front Staples
Load Staples
The front stapler unit of the Advanced
Finisher is out of staples.
Replace the front staple cartridge.
Out of Rear Staples
Load Staples
The rear stapler unit of the Advanced
Finisher is out of staples.
Replace the rear staple cartridge.
Paper in Center Path
Remove Paper
E0Cx
Self-explanatory
Remove the jammed paper.
Paper in Connecting Unit
Remove Paper
E073
Paper jam in connecting unit of the
Publishing Finisher.
Remove the jammed paper.
Paper in Container x path y
Remove Paper
E0Bx
Paper jam in container stacker. x is the
container number, y is the path
number.
Remove the jammed paper. Refer to
the Container Stacker User’s Guide.
Paper in CS1 Lower
Remove Paper
E0B7
Paper jam in stacker.
Remove the jammed paper. Refer to
the Container Stacker User’s Guide.
Paper in CS1 Upper
Remove Paper
E0B8
Paper jam in stacker.
Remove the jammed paper. Refer to
the Container Stacker User’s Guide.
Paper in CS2 Lower
Remove Paper
E0C0
Paper jam in stacker.
Remove the jammed paper. Refer to
the Container Stacker User’s Guide.
Paper in CS2 Upper
Remove Paper
E0C1
Paper jam in stacker.
Remove the jammed paper. Refer to
the Container Stacker User’s Guide.
Paper in Fin Holding Path
Remove Paper
E06A
or EO6B
Paper jam in holding path.
Remove the jammed paper.
Paper in Fin Sheet Path
Remove Paper
E06C
Paper jam in sheet path.
Remove the jammed paper.
Paper in Finisher
Remove Paper
E064
Paper jam in entrance path of the
Advanced Finisher.
Remove the jammed paper.
Message
Description
Corrective Action