Care and Maintenance
6-7
OG
L
0 0
Replacing the Toner Collector Bottle
When the OCP displays the message
Toner Bottle Full
, replace the Toner
Collector Bottle with a new empty bottle.
1. Open the Toner Collector Bottle Cover and the Inner Cover. (The Toner Cover
Door is located at the right side of the printer next to the MBT.)
2. Remove the old Toner Collector Bottle.
3. Remove the cap from the side of the Toner Collection Bottle and place it on top of
the bottle to seal it.
4. Install a new Toner Collector Bottle. (See illustration for Step 2.)
5. Close the Inner Cover and the Toner Collector Bottle Cover.
Toner Collector Bottle Cover
Empty Toner Bottle
Inner Cover
Install
Remove
Toner Collector Bottle Cover
Empty Toner Bottle
Inner Cover
Front Engine
Rear Engine
Cap