Care and Maintenance
6-61
OG
L
0 0
Detach Voltage Adjustment
The Detach Voltage is sensitive to elevation, humidity, and paper type. The default
setting is
“
144”; however, it may be necessary to adjust the setting based on the
conditions at the installation site. E118, E119, E128, and E134 errors are an indication
that an adjustment is necessary.
The procedure for adjusting the detach voltage will depend on the software revision of
your printer. Early revisions do not support individual tray adjustment.To determine
which procedure to use perform the following steps:
Select Printer / Options /
/ Detach Voltage / Front Engine
If individual tray adjustment is not supported the following screen will be displayed:
If individual tray adjustment is supported, the following screen will be displayed: